1 – Introduction
manual addresses the requirements specific to the AccuLoad and it is assumed that
-
1.1 Warnings and Precautions
Emergency Shutdown
IMPORTANT:
system control for the flow valve and pump controls, i.e. emergency stop, overfill,
-
series ahead of the AccuLoad to remove power to the ancillary devices.
Configuration
unit will not operate due to alarm conditions until the configuration is completed. Using
the front panel.
Hazardous Voltages
and maintenance of the AccuLoad and only qualified individuals should perform
this installation.
Hazardous Locations
specific installation methods required to produce a comprehensive explosion-proof
Any modification of the AccuLoad housing invalidates the hazardous location
rating of the AccuLoad.
• -
• Do not drill or machine the housing.
• Do not attempt to replace the touchscreen or glass except as part of the factory
To Next Page
Loading...
Need help?
General
