EasyManuals Logo
Home>Technoline>Clock>WS8055

Technoline WS8055 User Manual

Technoline WS8055
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Radio controlled reception icon
Indoor Temperature display
in ºC/ºF or seconds display
Date
Moon phase icon
Weekday
LCD SCREEN
The Moon Phase Clock's LCD is divided into 2 sections and once the batteries are
inserted, all the segments will light up briefly before displaying:
DCF time
Alarm icon
LCD1- DCF RADIO CONTROLLED TIME, ALARM AND SNOOZE
Once the batteries are inserted into the battery compartment, the Moon Phase Clock will
receive the DCF time within 3-5 minutes. Once received, all segments of the clock will
display the informations accordingly, then no further reception will take place for the DCF
signal that day.
The DCF reception takes places at 2:00 and 3:00 am each day. If the clock is unable to
receive the reception, it will attempt to receive the DCF time at the next full hour or as long
as it receives the DCF time successfully.
The time base for the radio controlled time is a Cesium Atomic Clock operated by the
Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less
than one second in one million years. The time is coded and transmitted from Mainflingen
near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of
approximately 1,500 km. Your radio-controlled Moon Phase Clock receives this signal and
converts it to show the precise time in summer or wintertime. The quality of the reception
depends greatly on the geographic location. In normal cases, there should be no reception
problems within a 1500km radius of Frankfurt.
When the time code is received, the DCF tower becomes permanently lit and the time will
be displayed.
If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,
then please take note of the following:
Recommended distance to any interfering sources like computer monitors or TV sets
is a minimum of 1.5 - 2 meters.
Within ferro-concrete rooms (basements, superstructures), the received signal is
naturally weakened. In extreme cases, please place the unit close to a window and/
or point its front or back towards the Frankfurt transmitter.
During nighttime, the atmospheric disturbances are usually less severe and
reception is possible in most cases. A single daily reception is adequate to keep the
accuracy deviation below 1 second.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technoline WS8055 and is the answer not in the manual?

Technoline WS8055 Specifications

Operating Environment IconOperating Environment
indoor temperature measuring range (Celsius)0ºC to +50ºC
indoor temperature measuring range (Fahrenheit)32ºF to +122ºF
indoor temperature checking intervalevery 10 seconds
Power IconPower
power source2 x AA, IEC LR6, 1.5V batteries
battery lifeabout 12 months
Weight and Dimensions IconWeight and Dimensions
dimensions (L x W x H)118 x 50 x 100mm

Related product manuals