REFRIGERATED CABINETS PERFEKT | PERFEKT PLUS
EN
32
8. USE
Before use, it is required to check that the refrigerated cabinet is in perfect condition. In the
presence of faults, the equipment must be decommissioned and the Technical Assistance
Service must be contacted.
It is recommended to keep all the supply and return air ventilation openings inside the
refrigerated cabinet free of obstructions.
8.1. CHECKS BEFORE USE
The first start-up must be performed by skilled personnel.
Before starting, make sure that:
▪ operations are not carried out with damp or wet hands.
▪ the appliance and surrounding surfaces are dry.
▪ there is no direct or indirect contact with live electrical parts.
▪ the refrigerated cabinet with built-in condensing unit is always exclusively vertical. If it has been tilted, wait at least 8
hours before start-up.
▪ the adjustment of the operating parameters is provided in chapter “CONTROL PANEL”.
▪ before inserting the plug into the electrical socket, the main switch on the equipment is in position “0 - OFF”.
Before switch-on, it is recommended to carefully clean the equipment and its components
as indicated in the chapter “CLEANING”.
8.2. ACTIVATION
Do not start the equipment with wet hands or when there is contact with water.
To start the refrigerated cabinet, proceed as follows:
STEP ACTION IMAGE
1
Press the the main switch to set it to position 1 - ON”.
Note: the main switch lights up green.
To Next Page
Loading...
Need help?
General
