26
User’s Guide
• If you wish to modify the time, touch or
until the time starts flashing. Touch
and and follow the instructions in the previ-
ous point.
NOTE
The clock light has a night mode so the display
light will dim between 00:00 and 6:00 hours.
WARNING
In the event of a power failure, your elec-
tronic clock/timer settings will be erased.
If this happens, turn the function and tem-
perature dials to the
position.
The indication 12:00 will show, and you will
then be able to set the time as described
above.
If the oven door was locked before the pow-
er cut, the locked symbol will show until it is
unlocked.
This may take several minutes, depending
on the temperature inside the oven, and
during this time you cannot reset the time.
Once the door is unlocked, you can set the
time as described above.
Oven use
• You will notice that the symbol lights up
during cooking to indicate that heat is being
transmitted to the food. This symbol disap-
pears when the selected temperature has
been reached.
• Set the controls to
to turn off the oven.
INFORMATION
When you start cooking, your oven will
show the time the oven has been cooking.
MANUAL OPERATION
• After setting the clock, the oven is ready for
use. Select a cooking function and tempera-
ture.
INFORMATION
In models with an electronic temperature
control, when the selector switch is turned,
the clock display will show the temperature.
After selecting the temperature, the clock
display will automatically reappear.
To see the temperature again during cook-
ing, press the
button and turn the tem-
perature dial if you want to change it.
To Next Page
Loading...
Need help?
General
