Tektronix 2246 User Manual

(VOLTMETER) BC
+PEAK
-PEAK
PK-PK
SELF CAL
(TO GATED MEASMT MENU)
(VOLTS PG 2) +PEAK
-PEAK
PK-PK
(BACK TO PREVIOUS MENU)
Figure 6-1. CH1/CH2 VOLTMETER Menu.
GATED —PEAK—Press to measure the most negative
(screen-relative) voltage in the gated (intensified) portion
of the waveform.
GATED PK-PK—Press to measure the peak-to-peak
voltage in the gated (intensified) portion of the
waveform.
{BACK TO PREVIOUS MENU)—Returns the first page
of the Voltmeter menu.
CURSORS MEASUREMENTS
Press
CURSORS
to
display
the
measurement
choices
of
menu
1
shown
in
Figure
6-2.
Measurement Processes and Applications —2246 Operators
(CURSORS) SEC 4
H 4/SEC +
H VOLTS 4
h VOLTS A
H PHASE 4
(TO AUTO TRACKING MENU)
(CURSORS - PG 2) TRACK MEASMT
TRACK TRIG LVL
TRACK +
(BACK TO PREVIOUS MENU)
(MENU OFF)
Figure 6-2, CURSOR Measurement Menus.
The action of the j- SEC -l, I+ 1/SEC +1, and
l- PHASE >! SmartCursors® is exactly the same as the
ATIME measurement choices. See the “ATIME MENU”
description for their operation.
l- VOLTS -i—Measures the equivalent voltage
difference between two horizontal cursors in either A
Horizontal MODE or X-Y Horizontal MODE. Both cur-
sors are positioned by the l- OR DELAY control and
the delta cursor is positioned by the -i OR A control.
When the VOLTS cursors measurement is first turned
on (or recalled as a last measurement mode), the peak
voltages of the source channel signal are measured and
one cursor is placed at the most positive peak and the
other is placed at the most negative peak.
6-3

Tektronix 2246 Specifications

General

Brand	Tektronix
Model	2246
Category	Test Equipment
Language	English