Tektronix 492 Operator's Handbook

Grounding the
Product
This
product
is
grounded
through
the
grounding conduc
tor of the
power
cord .
To avoid
electrical
shock
, plug the
power cord into a properly wired receptacle before
connecting to the product input or output terminals . A
protective ground
connection by way of the
grounding
conductor
in
the power
cord is
essential for safe opera
tion .
Danger
Arising
From
Loss of
Ground
Upon loss of the protective - ground connection , all
accessible conductive parts ( including knobs and con
trols that may appear to be insulating ) can render an
electric
shock
.
Use the Proper Power Cord
Use only the power cord and connector specified for your
product
.
Use only a power cord that is in good condition .
For detailed information on power cords and connectors ,
see
492 Service
Vol . 1 .
Refer cord and connector changes to qualified service
personnel .
Use the Proper Fuse
To avoid fire hazard , use only the fuse of correct type ,
voltage rating and current rating as specified in the parts
list for
your
product
.
Refer fuse replacement to qualified service personnel .
Do Not Operate in Explosive Atmospheres
To avoid explosion , do not operate this product in an
explosive atmosphere unless it has been specifically
certified for
such
operation .
Do Not Remove Covers or Panels
To avoid personal injury , do not remove the product
covers or panels . Do not operate the product without the
covers
and panels
properly installed .
492
Operator's
Handbook
iii

Tektronix 492 Specifications

General

Brand	Tektronix
Model	492
Category	Measuring Instruments
Language	English