Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Syntax
DISplay:FORMa
t {YT|XY}
DISplay:FORMat?
Arguments
YT sets the display to a voltage versus time format and is the default mode.
XY argument displays one waveform against another. Selecting one source causes
its corresponding source to be implicitly selected, producing a single trace from
the two input waveforms.
Examples
DISPLAY:FORMAT XY sets the display format to XY.
DISPLAY:FORMAT? might return DISPLAY: FORMAT YT indicating that the
display format is
YT.
DISplay:GLITch
Controls the display of the glitch capture background of the waveform. Set the
intensity with DISplay:INTENSITy:GLITch.
Group
FilterVu
Syntax
DISplay:GLITch {ON|OFF|<NR1>}
DISplay:GLITch?
Related Commands
DISplay:INTENSITy:GLITch
Arguments
ON or <NR1> ≠ 0 turns on the glitch capture waveform display.
OFF or <NR1> = 0 turns off the glitch capture waveform display.
Examples
DISPLAY:GLITCH?mi
ght return DISPLAY:GLITCH 1 indicating that there is
glitch capture waveform display.
DISPLAY:GLITCH OFF
turns off the glitch capture waveform display.
DISplay:GRAticule
Selects or queries the type of graticule the oscilloscope displays.
Group
Display
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-141

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English