To Next Page

To Previous Page

Command Groups

Table 2-32: Ve rtical Commands (cont.)

Command Description

SELect:BUS<x> Turns on or off the speciﬁed bus waveform

or returns whether the speciﬁed bus channel

is on or off

SELect:CH<x> Turnsonoroffthespeciﬁed waveform or

returns whether the speciﬁed channel is on

or off

SELect:D<x> Turns on the display of the digital channel

<x> and resets the acquisition. <x > is the

channel number

SELect:CONTROl Sets or returns the waveform that is selected

as the implied recipient of channel-related

commands

SELect:MATH[1] Turns on or off the math waveform or returns

whether the math waveform is on or off

SELect:REF<x> Turnsonoroffthespeciﬁed reference

waveform or returns whether the speciﬁed

reference waveform is on or off

Waveform Transfer Command Group

Use the commands in the Waveform Transfer Command Group to transfer

wav

eform d ata points to and from the oscilloscope. Waveform data points are a

collection of v alues that deﬁne a waveform. One data value usually represents

one data point in the waveform record. When working with envelope waveforms,

each data value is either the minimum or maximum o f a min/max pair.

2-50 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Programmer's Manual

Other manuals for Tektronix DPO2012B