To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Syntax

SELect:D<x> {<

NR1>|OFF|ON}

SELect:D<x>?

Arguments

ON turns on the display of the speciﬁed waveform. This waveform also becomes

the selected waveform.

OFF turns o ff the display of the speciﬁed waveform.

<NR1> = 0 turns off the display of the speciﬁed waveform; any other value turns

on the display of the speciﬁed waveform.

Examples

SELECT:D2 ON turns the digital channel 2 waveform display on, and selects

digital channel 2.

SELECT:D2? might return :SELECT:D2 1 indicating that digital channel 2 is

being displayed.

SELect:MATH[1]

Turns on and off the display of the math waveform. The query returns whether

the math waveform is on or off but does not indicate whether it is the selected

waveform.

Group

Vertical

Syntax

SELect:MATH[1] {ON|OFF|<NR1>}

SELect:MATH[1]?

Arguments

ON turns on the display of the speciﬁed waveform. This waveform also becomes

the selected waveform.

OFF turns o ff the display of the speciﬁed waveform.

<NR1> = 0 turns off the display of the speciﬁed waveform; any other value turns

on the display of the speciﬁed waveform.

Examples

SELECT:MATH ON turns the math waveform display on, and selects it.

SELECT:MATH? might return : SELECT:MATH 1 indicating that the math

waveform is being displayed.

MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-287

Tektronix DPO2012B Programmer's Manual

Other manuals for Tektronix DPO2012B