Tektronix DPO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Examples
PICTBRIDGE:DA
TEPRINT
? might return PICTBRIDGE:DATEPRINT DEFLT
indicating that the default setting of the printer.
PICTBRIDGE:D
ATEPRINT ON
enables the date print on the print output.
PICTBridge:DEFault (No Query Form)
Sets the arguments for all PictBridge commands to their default values. The
default values are the same as printer default settings.
Group
PictBridge
Syntax
PICTBridge:DEFault
Examples
PICTBRIDGE:DEFAULT sets all the PictBridge commands to their default values.
PICTBridge:IDPrint
Enables or disables printing the oscilloscope model and serial number on the
print output.
Group
PictBridge
Syntax
PICTBridge:IDPrint {DEFLT|OFF|ON}
PI
CTBridge:IDPrint?
Related Commands
Arguments
OFF disables the oscilloscope model and serial number print on the print output.
ON enables the oscilloscope model and serial number print on the print output.
Default is provided for compatibility with TDS instruments that support
pictbridge.
Examples
PICTBRIDGE:IDPRINT? might return PICTBRIDGE:I DPRINT 0 indicating that
the ID print is disabled on the print output.
PICTBRIDGE:IDPRINT ON enables the printing of oscilloscope model and serial
number on the print output.
2-222 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English