Tektronix DPO5000 Series Service Manual

Troubleshooting (MSO/DPO5000 Series)
Table 4-20: BIOS POST codes: ECM-945GM Series (cont.)
Module
Displayed
POST code Description
PnP Init
57
Display PnP logo and PnP early init
Reserved 58
Setup Virus Protect
59
Set up virus protect according to Setup
Reserved 5A
Awdflash Load
5B
If required, will auto load Awdflash.exe in POST
Reserved
5C
Onboard I/O Init
5D
Initializing onboard super IO
Reserved 5E
Reserved 5F
Setup enable
60
Display setup message and enable setup functions
Reserved 61
Reserved 62
Initialize & Install
Mouse
63
Detect if mouse is present, initialize mouse, install interrupt vectors
Reserved 64
PS2 Mouse special
65
Special treatment to PS2 Mouse port
Reserved 66
ACPI Init
67
ACPI Sub-system initializing
Reserved 68
Setup Cache Controller
69 Initialize ca che controller
Reserved 6A
Setup Entering
6B
Enter setup check and auto-configuration check up
Reserved
6C
Initialize Floppy Drive
& Controller
6D
Initialize floppy disk drive controller and any drives.
Reserved 6E
FDD install 6F
Install F DD and set up BIOS data area parameters
Reserved 70
Reserved 71
Reserved 72
Initialize Hard Drive &
Controller
73 Initialize hard drive controller and any drives.
Reserved 74
Install HDD
75
IDE device detection and install
Reserved 76
Detect & Initialize
Serial/Parallel
77
Initialize any serial and parallel ports (also game port)
4–56 MSO70000/C, DSA70000B/C, DPO70000B/C, DPO7000, MSO5000, DPO5000 Series

Tektronix DPO5000 Series Specifications

General

Brand	Tektronix
Model	DPO5000 Series
Category	Test Equipment
Language	English