Replaceable Parts List
This chapter c ontains a list of the replaceable modules for the DPO4000B and
MSO4000B Series Oscilloscopes. Use this list to identify and order replacement
parts.
Parts Order
ing Information
Replacement parts are available through your local Tektronix field office or
representative.
Changes to Tektronix products are sometimes made to accommodate improved
components as they become available and to give you the benefit of the latest
improvem
ents. Therefore, when ordering parts, it is important to include the
following information in your order.
Part num
ber (see Part Number Revision Level below)
Instrument type or model number
Instrument serial number
Instrument modification number, if applicable
If you order a part that has been replaced with a different or improved part, your
local Tektronix field office or representative will contact you concerning any
change in part number.
Change information, if any, is located at the rear of this manual.
Part Number Revision
Level
Tektronix part n umbers contain two digits that show the revision level of the
part. For some parts in this manual, you will find the letters XX in place of the
revision level number.
When you order parts, Tektronix will provide you with the most current part for
your product type, serial number, and modification (if applicable). At the time of
your order, Tektronix will determine the part number revision level needed for
your product, based on the information you provide.
Module Servicing
Modules can be serviced by selecting one of the next three options. Contact your
local Tektronix service center or representative for repair assistance.
MSO4000B and DPO4000B Series Digital Phosphor Oscilloscopes Service Manual 31
To Next Page
Loading...
Need help?
General
