Acquire the Signal
Using Autoset
Autoset adjusts the instrument (acquisition, horizontal, trigger, and vertical controls) such that it displays four or five waveform
cycles for a nalog channels with the trigg er near the midlevel, and ten cycles for digital channels.
Autoset works with both the analog and digital channels.
1. Connect the analog probe, and then select
the input channel. (See p age 81, Setting Up
Analog Channels.)
Connect the digital probe and select the
input channel. (See page 123, Setting Up
Digital Channels.)
2. Push Autoset to execute an Autoset.
90 MSO4000 and DPO4000 S eries Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
