Tektronix MSO73304DX User Manual

Acquisition
Setting up digital signal input
Use Digital setup menus to set up the digital channels to acquire signals. Digital channels are available only on
MSO70000C/DX and MSO5000B Series instruments, DPO5000B Series instruments with option MSOE installed, and
DPO70000DX instruments w ith option MSOU installed.
1. Connect the logic probe to the instrument.
2. Connect the probe to the input signal
sources.
CAUTION. To prevent damage to the
instrument always wear an antistatic wrist
strap when making connections to the
instrument and observe the maximum input
voltage ratings for input connectors.
MSO70000C
/DX and DPO70000DX Series
MSO5000B and DPO5000B Series
3. Set up digital channels and buses using
the Digital menus.
(See page 52, Setting up digital channels.)
and (See page 53, Setting up a bus.)
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series User Manual 51

Tektronix MSO73304DX Specifications

General

Brand	Tektronix
Model	MSO73304DX
Category	Test Equipment
Language	English