Getting Started
PS280 & PS283 User Manual
3
occurs. Refer to Appendix C: Replaceable Parts on page 33 for
fuse part numbers.
WARNING. To prevent electrical shock, connect the power cord to a
properly grounded power source. The outside (ground) of this
connector is connected through the equipment to the power source
ground. Do not remove the ground lug from the power cord for any
reason.
3. Connect the input power cord. Use only the power cords specified
for this equipment. Refer to Appendix C: Replaceable Parts on
page 33 for power cord part numbers.
To Next Page
Loading...
Need help?
General
