Tektronix RSA306 Self Help Guide

Demo 9: EMI spurious
The spurious measurement in the RSA306 is set up to change limits vs. frequency, and antenna correction factors
can be applied. Violations above the user-set limits are shown in red on the table. This example shows how to use
the spurious display in SignalVu-PC and the RSA306 to perform EMI pre-compliance and diagnostics.
Instructions for the demo board
1. Keep the same setting as the last
demo. Use the ROW and COLUMN
buttons to change the signal type
from QPSK1 back to CW.
Demo9CW
1
Instructions for the RSA306
1. Click Preset.
Demo9-Step1
1
Demo instructions
76 RSA306 Self-Guided Demo

Tektronix RSA306 Specifications

General

Brand	Tektronix
Model	RSA306
Category	Measuring Instruments
Language	English