Appendix A: Options and Accessories
A–6
TDS 500B, TDS 600B, & TDS 700A User Manual
P6243 Active, high speed digital voltage probe. FET. DC to 1.0 GHz. 50 W
input
P6101B 1X, 15 MHz, Passive probe
P6156 10X, 3.5 GHz, Passive, low capacitance, (low impedance Z
O
) probe.
Provides 100X, when ordered with Option 25
P6139A 10X, 500 MHz Passive probe
P6217 Active, high speed digital voltage probe. FET. DC to 4 GHz. DC
offset. 50 W input. Use with 1103 TekProbe Power Supply for offset control
P6204 Active, high speed digital voltage probe. FET. DC to 1 GHz. DC
offset. 50 W input. Use with 1103 TekProbe Power Supply for offset control
P6563AS Passive, SMD probe, 20X, 500 MHz
P5100 High Voltage Passive probe, 2.5 kV, DC to 250 MHz
P5205 High Voltage differential probe, 1 kV, DC to 100 MHz
AM 503S — DC/AC Current probe system, AC/DC. Uses A6302 Current
Probe
AM 503S Option 03: DC/AC Current probe system, AC/DC. Uses A6303
Current Probe
TCP 202 Current Probe, DC to 100 Mhz
P6021 AC Current probe. 120 Hz to 60 MHz
P6022 AC Current probe. 935 kHz to 120 MHz
CT-1 Current probe — designed for permanent or semi-permanent in-circuit
installation. 25 kHz to 1 GHz, 50 W input
CT-2 Current probe — designed for permanent or semi-permanent in-circuit
installation. 1.2 kHz to 200 MHz, 50 W input
CT-4 Current Transformer — for use with the AM 503S (A6302) and P6021.
Peak pulse 1 kA. 0.5 Hz to 20 MHz with AM 503S (A6302)
P6701A Opto-Electronic Converter, 500 to 950 nm, DC to 850 MHz,
1 V/mW
P6703A Opto-Electronic Converter, 1100 to 1700 nm, DC to 1 GHz,
1 V/mW
P6711 Opto-Electronic Converter, 500 to 950 nm, DC to 250 MHz, 5 V/mW
P6713 Opto-Electronic Converter, 1100 to 1700 nm, DC to 300 MHz,
5 V/mW
To Next Page
Loading...
Need help?
General
