Telecom Behnke 10 Series Quick Reference Guide

21
EXTENDED OPERATION
Entry Function
Activa- Activate relay
tion- In order to be able to activate a relay with an activation code, make sure that the relay’s
code # operational mode, its activation duration and, of course, its activation code are all set
correctly.
##x Set volume to value x (x = 0 to 9)
The setting of the volume only applies to the ongoing connection.
Setting the volume permanently is only possible with configuration step 06 or 07.
n# Hang up
nn Activate configuration mode (followed by entering security code)
n0 Switch between operation with and without add-on amplifier
1 OK beep Operation without add-on amplifier
2 OK beep Operation with add-on amplifier
Error beep Operation with add-on amplifier not possible or not allowed
Switching between operation with and without add-on amplifier is only possible if the add-
on amplifier has been activated with configuration step 07 and an additional 12-V DC power
supply has been attached.
During speech connection, the Behnke Telephone offers the following control options, which may be activated
with a touch-tone telephone:
1. Control options during a connection
n1 Activate MLM B
(If MLM B is not attached, this will activate the integrated MLM.)
n2 / n4 Activate MLM A
(If MLM A is not attached, this will activate the integrated MLM.)
n3 / n7 Activate MLM C
(If MLM C is not attached, this will activate the integrated MLM.)
n5 Switch between MLM A and integrated MLM
1 OK beep Integrated MLM activated
2 OK beep MLM A activated
3. The following commands are only possible, if several MLMs are attached:
(MLM = microphone/loudspeaker module)
2. Call Acceptance with ‘Redial / Group Call’ Activated:
Important: After lifting the handset, press the button to answer the call. Otherwise, the connection
will be broken automatically as ‘Redial / Group Call’ will proceed and the next number will be dialled.
DTMF telephone required (see configuration step 20 in the comprehensive technical manual – available
as PDF on the Internet).
#
ENGLISH

Telecom Behnke 10 Series Specifications

General

Brand	Telecom Behnke
Model	10 Series
Category	Intercom System
Language	English