Telecom Behnke 10 Series Quick Reference Guide

14
LIFT EMERGENCY TELEPHONES
optional:
20-9230 Outside-car speech
module w/ button for under-
neath the car
Emergency
communication
device on top
of the lift car
with outside-
car speech
module
20-0028
Lift emergency
telephone
Emergency
communication
device inside
the car with
microphone
(using the
existing
emergency
button)
Sound
projection from
the panel or
from above
Existing emergency button
in the car operating panel
(break or make contact) or
button 20-9100
20-9219
Speech module,
size 3
NOTRUF
20-9302 Patch cable, 5 m
20-9301 Patch cable, 3 m
12 – 24 V DC
Emergency power
supply, e.g.
20-9650 BNOS UPS
20-9501 BNOS battery
power supply
20-0030/20-0031
Machine-room/car telephone
EMERGENCY
TAE socket
NFF
Telephone connection
1
2
3
4
5
6
7
8
9
0
Notruf
Hotline
2
5
8
0
1
4
7
*
3
6
9
#
ABC
JKLGHI
PQRS TUV
DEF
MNO
WXYZ
R
M
IWV/MFV
220 V
Lift emergency telephone with machine-room/car telephone
Notes:
1. The speech module, as
well as the rear-mount-
ing loudspeaker and
microphone require suf-
ficiently large sound
inlet and outlet holes
(see also page 2).
2. Rear-mounting compo-
nents must be mounted
flush
with the rear side
of the car operating
panel using a gasket
(important for good
sound quality). See also
note on page 2.
3. Keep the distance
between the micro-
phone and loudspeaker
as large as possible. See
also note on page 2.
4. For notes on mounting
B
NOS MCT (machine-
room/car telephone),
B
NOS UPS, BNOS hubs,
etc., refer to the corre-
sponding products.
1
Basic diagram of lift installation

Telecom Behnke 10 Series Specifications

General

Brand	Telecom Behnke
Model	10 Series
Category	Intercom System
Language	English