Texas Instruments TI-83-Plus User Guide

TI-83 Plus GeoMaster™ Application Page 22
Creating, Saving, and Opening Files
Use the
FILE
menu to create, save, open, and append files, as
well as to clear the screen and exit the application.
Note
•
To select the FILE menu, press
R
.
•
If the GeoMaster™ menu bar is not displayed, press
V
.
•
Press
s
to exit the menu item that is currently selected.
Creating a New File
To create a new file, select
New File
from the
FILE
menu.
Note
If the current screen contains objects, the application prompts
you to save them to a file.
Opening an Existing File
1. Select
Open File
from the
FILE
menu. A list of file names is
displayed.
2. Select a file name from the list, and then press
¯
. The
file is displayed.
Note
If the current screen contains objects, the application prompts
you to save them to a file.

Texas Instruments TI-83-Plus Specifications

General

Display Type	LCD
Display Resolution	96 x 64 pixels
Power Source	4 AAA batteries
Programming Language	TI-BASIC, Z80 Assembly
Backup Power	CR1616 or CR1620 lithium battery
RAM	24 KB
Processor	Zilog Z80
Weight	7.4 oz (210 g) with batteries
Dimensions	7.3 x 3.5 x 0.9 inches