Texecom Veritas Excel User Manual

Veritas Excel User Guide Using Your Alarm
INS166 9
The CHIME Facility
It is possible to set one or more zones to chime when the system is unset. When
a zone is enabled for Chime and Chime is turned on, the control panel will sound
a tone whenever the zone is opened.
To Program the Zones which CHIME
Enter your 4-digit Access code
####
########
####
and press
-
--
-
, the
display will show the zones that are currently selected for Chime (in this example
Zones 1 & 3 are selected for Chime).
1#/N3$%;,)=$%>".%
!"#$0%5:&:::::%
! "
To display the descriptive text associated with a particular zone number,
press and hold the corresponding key
#
##
#
.
Press the number key(s)
#
##
#
… of the zone(s) to be selected or deselected.
When completed press
*
**
*
to turn Chime on (the control panel will sound the
Chime tone) or press
,
,,
,
to turn Chime off (the control panel will sound the
Error tone).
! "
Once zones have been programmed for Chime, the Chime feature can be
turned on or off by just pressing
-
.
To turn CHIME On
Press
-
--
-
, the Chime tone will sound and the display will look something like
this for 5 seconds before reverting to normal:
;,)=$%)0%OP%
!"#$0%5:&::::::%
To turn CHIME Off
Press
-
--
-
, the Error tone will sound and the display will look something like this
for 5 seconds before reverting to normal:
;,)=$%)0%O>>%
!"#$0%5:&::::::%
! "
If no zones have been enabled for Chime, then turning Chime on and off
will have no effect.

Texecom Veritas Excel Specifications

General

Brand	Texecom
Model	Veritas Excel
Category	Keypad
Language	English