Thermo King TriPac EVOLUTION User Manual

Unit Description
17
Control Box and Fuses
The control box is typically located in the bunk area. The
control box contains the circuit board and operates on 12 Volt
DC supplied by the truck batteries.
The electrical system is protected by a number of fuses. Most
of the fuses are located inside the control box. Other fuses are
located in fuse holders in wire harnesses. See “Fuses” on page
36.
Control Box
TriPac Options
Driver Convenience Package
Includes 1,800 watt inverter and two GFI receptacles. 120 amp
alternator provides quicker battery charging under heavy loads.
See the Operating Instructions included with your inverter.
Standby Truck Integration
Provides seamless activation of the TriPac control system
based on tractor off / on indication.
ARA2105
Unit Description
17
Control Box and Fuses
The control box is typically located in the bunk area. The
control box contains the circuit board and operates on 12 Volt
DC supplied by the truck batteries.
The electrical system is protected by a number of fuses. Most
of the fuses are located inside the control box. Other fuses are
located in fuse holders in wire harnesses. See “Fuses” on page
36.
Control Box
TriPac Options
Driver Convenience Package
Includes 1,800 watt inverter and two GFI receptacles. 120 amp
alternator provides quicker battery charging under heavy loads.
See the Operating Instructions included with your inverter.
Standby Truck Integration
Provides seamless activation of the TriPac control system
based on tractor off / on indication.
ARA2105

Thermo King TriPac EVOLUTION Specifications

General

Application	Truck
Fuel Type	Diesel
Refrigerant	R-134a
Voltage	12V DC
Type	Auxiliary Power Unit (APU)
Battery Capacity	100 Ah
Fuel Consumption	0.1 gal/h (idle)
Noise Level	65 dB(A)
Alternator	65 Amps