Thermo King TriPac EVOLUTION User Manual

45
Serial Number Locations
APU: Unit nameplate is located on front right edge of APU
frame near the Engine On/Off Switch. Open the service access
door to view the nameplate.
Engine: Nameplate is located on the top of the engine inside
the TriPac APU.
Compressor: Nameplate is located on compressor body. The
compressor is located inside the TriPac APU.
Heater: Nameplate is located on the side of the heater. The
heater is typically installed in the cargo compartment or under
the truck cab sleeper compartment.
45
Serial Number Locations
APU: Unit nameplate is located on front right edge of APU
frame near the Engine On/Off Switch. Open the service access
door to view the nameplate.
Engine: Nameplate is located on the top of the engine inside
the TriPac APU.
Compressor: Nameplate is located on compressor body. The
compressor is located inside the TriPac APU.
Heater: Nameplate is located on the side of the heater. The
heater is typically installed in the cargo compartment or under
the truck cab sleeper compartment.

Thermo King TriPac EVOLUTION Specifications

General

Application	Truck
Fuel Type	Diesel
Refrigerant	R-134a
Voltage	12V DC
Type	Auxiliary Power Unit (APU)
Battery Capacity	100 Ah
Fuel Consumption	0.1 gal/h (idle)
Noise Level	65 dB(A)
Alternator	65 Amps

Summary

Safety Precautions

General Safety Practices

Refrigerant and Oil Safety

Electrical and Battery Safety

Safety measures for electrical systems, batteries, and low voltage hazards.

Installation and Decals

Unit Description

Manual Pretrip Inspection

Pre-Trip Inspection Steps

Operating Instructions

HMI Interface and Controls

Navigating the HMI display, controls, and basic operations.

System Modes and Settings

Using On/Off, Mode, Temperature, and Fan Speed selectors.

System Status, Standby, and Alarms

Operating Modes and Engine Management

Alarm Codes and Clearing

Detailed explanation of alarm codes and their clearing process.

Power Inverter (Option)

Inverter Operation Warnings

Specifications

Maintenance Inspection Schedule

Engine Maintenance

Regular inspection and service intervals for the engine.

Oil Change and Filter Schedule

Schedule for changing engine oil and filters based on hours.

Electrical and Structural Checks

AC System and Heater Service