thomann Stairville DMX Invader 1024 NET User Manual

6.4 Editing a Chase
The device can store 62 chaser programmes, each with up to 100 steps. Steps correspond to
scenes.
1. Press [PROGRAM] to enter the Edit mode.
ð
The [PROGRAM] LED ashes.
2. Press [CHASE (A)] or [CHASE (B)] and the number buttons [1 … 31] to select the number of
the chase you want to edit.
3. To insert a new step into the chase, press [INSERT].
ð
The sum of the steps in the chase and the number of the current step are shown in
the display. The last step of a chase is marked with a *.
4. To copy the current step, press [COPY].
5. To copy all the steps of a chase, press and hold [COPY] for about 1 second.
6. To insert a copied step from another chase into the current chase, press [PASTE].
7. To delete the current step, press [DELETE].
Inserting steps in or removing
from a chase
Operating
DMX controller
52

thomann Stairville DMX Invader 1024 NET Specifications

General

Brand	thomann
Model	Stairville DMX Invader 1024 NET
Category	Controller
Language	English