To Next Page

To Previous Page

Creation: 01.31 - 2014

1-4-1

GPU - 406

GPU

409

Shipping

1. Shipping the Unit

A. Secure the unit using straps or chains over the axles. Use wheel chocks in front of and behind

the tires to prevent movements.

B. Lifting Arrangements

If it is desired to lift the unit with a forklift, utilize the unit forklift pockets only to move the unit. Do not

hoist, lift or otherwise move the unit using the on frame tie down points, they are designed for stowage

only.

CAUTION:

DO NOT SHIP THE UNIT BY RAIL. DAMAGE MAY OCCUR DUE

TO HIGH AND UNPREDICTABLE ACCELERATION WHEN

SHIPPING BY RAIL AND THE FACTORY SUGGESTS THAT

OTHER MODES OF TRANSPORTATION BE USED.

CAUTION:

DO NOT USE CHAINS OR STRAPS OVER FUEL LINES,

ELECTRICAL WIRES, OR COMPONENTS.

NOTE:

If shipping the unit by boat it is advisable to keep the unit below

decks and away from salt water spray. If this is unavoidable,

cover the unit with plastic to keep salt water spray from coming

in contact with the unit.

Questions and Answers:

Need help?

Do you have a question about the TLD GPU-409 and is the answer not in the manual?

TLD GPU-409 Specifications

General