Creation: 01.31 - 2014
1-5-1
GPU - 406
Storage
1. Storing the Unit
A.
When storing the unit in cold ambient temperatures, be sure that the proper antifreeze percentage
is present in the engine cooling system.
B. When storing the unit for extended periods of time, perform the following steps:
(1) Drain the cooling system completely from the engine and radiator. Drain the DEF tank if the
unit is equipped with a Tier 4 Final engine.
(2) Remove most of the weight from the tires using blocks under the frame.
(3) Remove all fuel from the fuel tank and add a desiccant to absorb condensation.
(4) Cover the air screens on the generator with tape to prevent the ingress of foreign material.
(5) Disconnect the battery with the battery switch.
2. Removing the Unit From Storage
A. Check and replenish the level of engine coolant. Replenish the DEF if the unit is equipped with a
Tier 4 Final engine.
B. Check and replenish the level of oil in the engine.
C. Remove the tape on the generator air screens.
D. Visually check of the unit for damage, as birds and small rodents may build nests or chew on wires
and hoses.
E. Connect the battery with the battery switch.
NOTE:
Consult the manufacturer's literature in Chapter 5 for further
Information on storage.
NOTE:
Consult the manufacturer's literature in Chapter 5 for further
Information on removing components from storage.
To Next Page
Loading...
Need help?
General
