TOHATSU M 18E2 User Manual

ADJUSTMENT 51
9
1. Throttle friction adjustment screw
2. Lighter
3. Heavier
ENOM00076-0
ENOW00076-0
z Be sure that outboard motor is secured to
transom or service stand, or accidental
drop or fall of outboard motor could lead
to severe personal injury.
z Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
z Do not go under outboard motor tilted up
and locked, or accidental fall of outboard
motor could lead to severe personal
injury.
ENOW00075-0
Inappropriate adjustment of trim tab could
cause steering difficulty. After installing or
readjusting trim tab, check if steering fiction
is even.
If straight-line cruising can not be
achieved, adjust the trim tab located
under the anti-ventilation plate.
z If the boat veers toward the left direct
the trim tab towards A (left from rear
of boat).
z If the boat veers toward the right
direct the trim tab towards B (right
from rear of boat).
1. Trim tab
ENON00022-A
Notes
z After adjustment securely tighten the
trim tab fixing bolt.
z Check for looseness of the bolt and the
trim tab at regular intervals.
4. Trim tab adjustment
WARNING
WARNING
1
2
3
ENOF00078-2
1
1
ENOF00912-A

TOHATSU M 18E2 Specifications

General

Brand	TOHATSU
Model	M 18E2
Category	Outboard Motor
Language	English