To Next Page

To Previous Page

My Vehicle

Important: Route planning for a specific vehicle type is available only when a truck map is installed.

If a truck map is not installed, a car route is planned instead.

Select Settings in the Main Menu, then select My Vehicle.

On this screen, you can set your vehicle type and dimensions.

Routes planned by your device avoid restrictions for the vehicle type, and take into account the

vehicle's specifications.

 Vehicle Type

Select this setting to choose your vehicle type. When you select your vehicle, the following

details for your vehicle are shown:

 Length / Width / Height

 Weight / Max. axle weight

 Maximum speed

For vehicle types Car, Taxi, Van and Other, the dimensions, weights and maximum speed are set

to zero. To change a setting, select it and enter a value that is specific to your vehicle. You can

also leave a setting at zero so it will not be used to determine restrictions when a route is

planned.

For vehicle types Bus and Truck, pre-set dimensions, weights and maximum speed are shown. To

change a setting, select it and enter a value that is specific to your vehicle.

Important: Settings that are set at zero are not used to determine restrictions when a route is

planned.

 HAZMAT

If your vehicle type is Truck and you are transporting hazardous materials, select this setting to

choose the type of hazardous material.

Appearance

Select Settings in the Main Menu, then select Appearance.

On this screen, you can change these settings:

 Display

Select Display to change the appearance of the display.

 Route bar

Settings

TomTom TRUCKER User Manual

Questions and Answers: