5
Safety
7. If the fuel tank has to be drained, this should be
done outdoors.
8. Be careful during adjustment of the machine to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
9. On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
10. When the machine is to be parked, stored or left
unattended, lower the cutting means unless a pos-
itive mechanical lock is used.
Sound & Vibration Levels
Sound Levels
This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 88 dB(A), based
on measurements of identical machines per
84/538/EEC.
This unit has a sound power level of 98 dB(A)/1pW,
based on measurements of identical machines per pro-
cedures outlined in Directive 79/113/EEC and amend-
ments
Vibration Levels
This unit has a vibration level of 9.0 m/s
2
at the poste-
rior, based on measurements of identical machines per
ISO 2631 procedures.
This unit does not exceed a vibration level of 0.5 m/s
2
at the posterior based on measurements of identical
machines per ISO 2631 procedures.
To Next Page
Loading...
Need help?
General
