Toro 07433LT - Page 23

Raising the Cargo Bed to the
Service Position
1. Pull the lever on left, inside of the cargo bed
toward you and lift the cargo bed up ( Figure 21 ).
2. Pull prop rod into the service position detent slot
to secure the bed for maintenance ( Figure 22 ).
Lowering the Cargo Bed
W ARNING
The weight of the bed may be heavy . Hands
or other body parts could be crushed.
Keep your hands and other body parts away
when lowering the bed.
1. Raise the cargo bed slightly by lifting up on the
latch lever ( Figure 21 ).
2. Pull the prop rod out of the detent slot ( Figure
22 ).
3. Lower the bed until it latches securely .
Opening the T ailgate
1. Ensure that the cargo bed is down and latched.
2. Using both hands, raise the tailgate using the
ridge near the top of the tailgate ( Figure 23 ).
3. Lower the tailgate until it is ush with the bottom
of the cargo bed ( Figure 23 ).
g034022
Figure 23
23