Operating Zones Manually
1. Return the control dial to run .
2. Position the
programs switch as needed
to select the program with the assigned
zone(s).
3. Press the
manual start button.
4. The first zone assigned to the program will
begin flashing. To select this zone, press
the +/
on button. To skip this zone, press
the –/
off button. Continue selecting any
additional zones in this manner.
5. Press the
manual start button.
6. To select zones from another program,
repeat steps 2 through 5.
Rain Delay Feature
This feature enables all watering operations
to be delayed from 1 to 7 days.
1. Turn the control dial to the
rain delay
position.
2. To set the number of Rain Delay days,
press the +/
on or –/off button.
3. Turn the control dial to the
run .
Note: To cancel Rain Delay operation,
turn the control dial momentarily to
off.
Note: The indicated Rain Delay number
will decrease as each day passes. When
the number reaches 0 (zero), automatic
operation will resume.
14
To Next Page
Loading...
Need help?
General
