Season Adjust Feature
Note: Prior to using the Season Adjust feature
for the first time, refer to the ECXTRA User’s
Guide for additional important operating
information.
1. Turn the control dial to the
season adjust
position.
2. Set the
programs switch to select the
desired program.
3. Press the +/
on or –/off until the desired
adjustment value (10% to 200%) is
flashing.
4. Return the control dial to
run .
Electromagnetic Compatibility
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal
-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer
-
ence will not occur in a particular installation. If this equipment
does harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician
for help.
The user may find the following booklet prepared by the
Federal Communications Commission helpful:
“How To Identify and Resolve Radio-TV Interference
Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402. Stock
No. 004-000-00345-4.
15
To Next Page
Loading...
Need help?
General
