excessoil,refertoChangingtheEngineOil(page
17).
Important:Iftheoillevelinthecrankcaseis
toolowortoohighandyouruntheengine,
youmaydamagetheengine.
6.Installthedipsticksecurely.
AdjustingtheCuttingHeight
WARNING
Adjustingthecuttingheightmaybringyouinto
contactwiththemovingblade,causingserious
injury.
•Stoptheengineandwaitforallmovingparts
tostop.
•Donotputyourngersunderthehousingwhen
adjustingthecuttingheight.
CAUTION
Iftheenginehasbeenrunning,themuferwillbe
hotandcanseverelyburnyou.Keepawayfromthe
hotmufer.
Adjustthecuttingheightasdesired.Setall4wheelstothe
sameheight.
Note:Toraisethemachine,moveall4cuttingheightlevers
forward;tolowerthemachine,movethemallrearward
(Figure13).
G027605
A = 3 cm (1-1/4 inches)
B = 4 cm (1-3/4 inches)
C = 6 cm (2-1/4 inches)
D = 7 cm (2-3/4 inches)
E = 8 cm (3-1/4 inches)
F = 1 1 cm (4-1/4 inches)
G = 1 1 cm (4-1/4 inches)
Figure13
AdjustingtheHandleHeight
Youmayraiseorlowerthehandletoapositioncomfortable
foryou.
Rotatethehandlelock,movethehandleto1of3positions,
andlockthehandleintoposition(Figure14).
Figure14
1.Handlelock2.Handlepositions
StartingtheEngine
1.Pulltheblade-controlbartothehandle(Figure15).
Figure15
2.Pulltherecoil-starthandle(Figure16).
Figure16
10