Workman GTX Electric Page 5 -- 11 Chassis
Service and Repairs
Check Tire Pressure
The tire pressure range for front and rear tires is 24 to
30 PSI (165 to 207 kPa).
The air pressure needed is determined by the payload
carried. Lower air pressure will provide less compac-
tion, a smoother ride and fewer tire marks. Lower pres-
sure should not be used for heavy payloads at higher
speeds.
Higher pressures should be used for heavier payloads
at higher speeds. Do not exceed the maximum tire pres-
sure.
Inspect Tires and Wheels
Operating accidents, such as hitting curbs, can damage
a tire or rim and also disrupt wheel alignment. Inspect
tire and rim condition after any accident.
Check wheels to ensure they are mounted securely.
Torque wheel lug nuts in a crossing pattern f rom 75 to
95 ft-lb (102 to 128 N--m).
Chassis
To Next Page
Loading...
Need help?
General
