36
Repeat playback/A-B Repeat playback
Repeat playback (DVD/VCD)
1
Press PLAY MODE during playback or stop mode.
2
Press ENTER/CH LIST repeatedly to select
“Chapter” or “Title”.
3
Press to select “Repeat”, then press
ENTER/CH LIST repeatedly to select a repeat
mode.
Playback automatically applies after the current track
is finished.
Note:
• If you set the repeat mode during stop mode, press PLAY to start playback.
4
Press PLAY MODE again to close the Play Mode window.
To resume normal playback, select “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• The repeat playback function is cancelled when the SKIP / SKIP buttons are
pressed.
A-B Repeat playback (DVD/VCD/Audio CD)
The A-B repeat function lets you repeat a specific section between two set points.
1
Press REPEAT A-B at the point
where you would like the playback loop to
begin. This sets your ‘A’ point.
2
When the playback reaches the point where you would like the playback loop to stop, press
REPEAT A-B again. This sets your ‘B’ point.
This section between points A and B will
be played repeatedly in a loop until you
turned off the Repeat A-B mode.
3
To resume normal playback, press REPEAT A-B until ‘ Off’ appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may not be displayed.
• You may not be able to set A-B Repeat during certain scenes of the DVD.
• A-B Repeat does not work with an interactive DVD and JPEG CD.
To Next Page
Loading...
Need help?
General
