Toshiba 19LV61K User Manual

2-4: CONTRAST CENTER
2-5: CONTRAST 40
1. Place the set in Aging Test for more than 15 minutes. 1. Place the set in Aging Test for more than 15 minutes.
2. Receive the color bar pattern. (RF Input) 2. Receive the color bar pattern. (RF Input)
3. Using the remote control, set the brightness and 3. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
4. Activate the adjustment mode display of Fig. 1-1 and 4. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
5. Press the LEFT/RIGHT button on the remote control 5. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "98". until the contrast step No. becomes "138".
6. Check if the picture is normal. 6. Check if the picture is normal.
7. Receive the color bar pattern. (VIDEO Input) 7. Receive the color bar pattern. (VIDEO Input)
8. Using the remote control, set the brightness and 8. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
9. Press the INPUT ZOOM button on the remote 9. Press the INPUT ZOOM button on the remote
control to set to the AV mode. control to set to the AV mode.
Activate the adjustment mode display of Fig. 1-1 and 10. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 11. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "114". until the contrast step No. becomes "149".
Check if the picture is normal. 12. Check if the picture is normal.
Receive the color bar pattern. (S-VIDEO Input) 13. Receive the color bar pattern. (S-VIDEO Input)
Using the remote control, set the brightness and 14. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
10.
11.
ELECTRICAL ADJUSTMENTS
12.
13.
14.
D-6
26LV61K
contrast to normal position.
contrast to normal position.
Press the INPUT ZOOM button on the remote 15. Press the INPUT ZOOM button on the remote
control to set to the AV(Y/C) mode. Then perform the control to set to the AV(Y/C) mode. Then perform the
above adjustments 10~12. above adjustments 10~12.
Receive the color bar pattern. (COMPONENT Input) 16. Receive the color bar pattern. (COMPONENT Input)
Using the remote control, set the brightness and 17. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Press the INPUT ZOOM button on the remote 18. Press the INPUT ZOOM button on the remote
control to set to the COMPONENT mode. control to set to the COMPONENT mode.
Activate the adjustment mode display of Fig. 1-1 and 19. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 20. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "115". until the contrast step No. becomes "149".
Check if the picture is normal. 21. Check if the picture is normal.
Receive the color bar pattern. (HDMI Input) 22. Receive the color bar pattern. (HDMI Input)
Using the remote control, set the brightness and 23. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Press the INPUT ZOOM button on the remote 24. Press the INPUT ZOOM button on the remote
control to set to the HDMI mode. control to set to the HDMI mode.
Activate the adjustment mode display of Fig. 1-1 and 25. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 26. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "95". until the contrast step No. becomes "129".
Check if the picture is normal. 27. Check if the picture is normal.
Playback the DVD(480i) disc. 28. Playback the DVD(480i) disc.
Press the INPUT ZOOM button on the remote 29. Press the INPUT ZOOM button on the remote
control to set to the DVD mode. control to set to the DVD mode.
Using the remote control, set the brightness and 30. Using the remote control, set the brightness and
contrast to normal position. contrast to normal position.
Activate the adjustment mode display of Fig. 1-1 and 31. Activate the adjustment mode display of Fig. 1-1 and
press the channel button (50) on the remote control to press the channel button (58) on the remote control to
select "CONTRAST CENTER". select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control 32. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "112". until the contrast step No. becomes "144".
Check if the picture is normal. 33. Check if the picture is normal.
15.
16.
17.
18.
19.
20.
21.
22.
23.
30.
31.
32.
33.
24.
25.
26.
27.
28.
29.
D-6
26LV61K

Toshiba 19LV61K Specifications

General

Brand	Toshiba
Model	19LV61K
Category	LCD TV
Language	English