17
Getting started
Single RF Scan
Scan single RF channel. You can check the Signal
Strength and the Signal Quality.
1. Select Channels from the SETUP menu.
2. Highlight Single RF Scan and press ► or to
enter.
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Channels
Select Back Exit
EXIT
Enter
OK RETURN
3. Press ◄ or ► to select the RF Channel. Press
to start scanning.
Single RF Scan
Back Exit
EXIT
Scan
OK RETURN
Scan single RF channel. (Digital Only)
RF Channel
Signal Strength
Signal Quality
8
100
Good
0%
Analogue Manual Scan
The television can be tuned-in manually using Analogue
Manual Scan.
1. Press and then press ◄ or ► to select SETUP.
2. Press ▲ or ▼ to highlight Channels. Press ► or
to enter.
3. Select Analogue Manual Scan. Press ► or to
confirm.
Auto Scan
Update Scan
Analogue Manual Scan
Channel Skip
Channel Sort
Channel Edit
Analogue Channel Fine Tune
Channels
Select Back Exit
EXIT
Enter
OK RETURN
4. Use number buttons 0~9 to enter the Start
Frequency. Press ▲ or ▼ to select Scan Up or Scan
Down. Press ► or
to start scanning. Press
RETURN
to
stop scanning.
Analogue Manual Scan
Back Exit
EXITRETURN
Search for analogue channels
Start Frequency (MHz) 175.25
Scan Up
Scan Down
Channel Skip
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control
must be removed as the channels will still be available
using the number buttons. Programmes can then be
watched as normal using the controls on the television,
but the television will not show the skipped programme
position.
1. In the SETUP menu, press ▼ to highlight Channels
and press ► or
to select.
2. Press ▲ or ▼ to highlight Channel Skip and press
► or
to select.
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Channels
Select Back Exit
EXIT
Enter
OK RETURN
3. Press ▲ or ▼ to select the channels you want to
skip, then press
to set.
Channel Skip
Select Back Exit
EXIT
Set
OK RETURN
1 Digital ABC HDTV
The skipped programme positions cannot be selected
by P
and P , or by the controls on the television,
but can still be accessed by the number buttons on the
remote control.