15
Notes:
• Home is recommended for normal home use. Select
Store when using a TV for displaying in a shop, etc.
•The searching progress bar will move along the line.
You must allow the television to complete the search.
5. You can also skip the initial setup process by selecting Skip
Scan.
6. During the setup, you can follow the hints available at
the bottom of the screen to return to the previous step by
pressing the ◄ button. Or press EXIT to exit or interrupt
the search halfway.
7. After the initial setup nishes, press OK to display the
channel list.
Setting the programmes
1. Press MENU, use or to select SETUP, then press OK
to enter.
2. Select Channel Install by pressing the or button, then
press OK or to enter the next step. The channel install
options include Automatic Search, Analogue Manual Scan
and Digital Manual Tune.
Automatic Search
System Information
Reset TV
...
...
...
Exit
Automatic Search
EXIT
Status: Scanning...
Analogue Channels: 0
Digital Channels: 5
62%
Press the or button to select Automatic Search and
press OK to enter. The options include Digital & Analogue,
Digital and Analogue. Use the or button to select one,
then press OK to start channel scan.
Analogue Manual Scan
Press the or button to select Analogue Manual Scan,
and press OK to enter. Use the or button to select your
System, then press the or button to select Search and
press OK to start channel scan. After scanning, select Store
Current Channel or Store as New Channel to store
selected channels.
Digital Manual Tune
Press the or button to select Digital Manual Tune,
and press OK to enter the next step. Use the or button
to adjust Start Frequency, then press OK to start channel
scan.
3. After searching, the menu will remain on the screen for 10
seconds, then the TV will enter the channel you searched.
Press on the remote control to browse all channels
you searched.
4. Press RETURN to go back to the previous menu. Press
EXIT to exit.
System Information
Reset TV
...
...
...
Select
Back
Exit
Search
System Australia
Store Current Channel
Store as New Channel
Store
Store
Analogue Manual Scan
RETURN
EXIT
44.00
Select
Back
Exit
Enter
OK
Analogue Manual Scan
Automatic Search
Digital Manual Tune
...
...
Channel Install
...
RETURN
EXIT
Exit
Digital Manual Tune
EXIT
Start Frequency (MHz)
0%
Start Frequency (MHz) 0.00
Select
Back
RETURN
OK
To Next Page
Loading...
Need help?
General
