Analogue Only Text Services
This television has a multi-page text memory, which takes a few moments to load.
Only available if an analogue service is transmitted.
Before using the text services, the required language
region must be chosen.
• Select Language from the Settings menu.
• Highlight Teletext in the Language Settings
menu and press Left or Right button to choose the
required language region.
After the Teletext language is selected, press MENU
button to exit.
Using Text Button -TXT
• To view text services press TXT. Press TXT again to
superimpose text over a normal broadcast picture.
• Press TXT again to return to normal viewing.
• Programmes cannot be changed until text is
cancelled.
• The rst text page shown will be the initial page.
• Any text page can be accessed by entering the 3
digit page number using the numbered buttons.
Press CH
/ or Up/Down buttons to go to the
next/previous page.
• Four coloured titles will appear at the base of the
screen. To access one of the four given subjects,
press the relevant coloured button on the remote
control.
• For further information on your particular text
system(s), see the broadcast text index page or,
consult your local Toshiba dealer.
Below is a guide to the functions of the remote control
text buttons.
Accessing Sub-pages
If a text page has sub-pages, press Left/Right buttons
or enter the sub-page number 0001, 0002, 0003 etc.
to access.
Revealing Concealed Text
To discover the solutions on quiz and joke pages press
the “INFO” button.
Holding a Page
At times it is convenient to hold a page of text. Press
OK and “HOLD” will appear in the top left of the
screen. The page will be held on screen until the
button is pressed again.
To display an initial page
Press RETURN to access an initial page. The one
displayed is dependant on the broadcaster.
To Next Page
Loading...
Need help?
General