15
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
Connecting an audio system
This connection allows you to use an audio amplifier and external
speakers, and adjust the audio level using the TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn
off the TV's built-in speakers (see “Turning off the built-in speakers” on
page 40.)
Note:
To hear sound when using an external audio amplifier, the volume of
both the TV and the amplifier must be set above 0 (zero.)
For example, if the volume of the TV is set to 0, you will not be able to
hear any sound, even the volume of the amplifier is at its highest level.
LINE IN
LR
TV
Amplifier
You will need:
• one pair of standard audio cables
Connecting
your TV
J3S40121B(E)_P07-15 24/02/2005, 6:06 PM15
To Next Page
Loading...
Need help?
General
