24
To clear your favorite channels:
1. Select a channel you want to clear.
2. Press MENU, then press
or to display the OPTION menu.
3. Press ▲ or ▼ to highlight FAVORITE CH.
4. Press
or to display the FAVORITE CH menu. SET/CLEAR
will be highlighted.
5. Press or to highlight CLEAR.
6. Press ENTER until “0” replaces the channel number you want to
erase.
7. Press EXIT to return to normal viewing.
8. Repeat steps 1-6 for the other channels.
Using the LOCKS menu
Note: The V-Chip feature is available for the U.S. V-Chip system
only. The Canadian V-Chip system is not supported.
You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.
Selecting a password
Before you can use the V-Chip feature to block programs and
channels, you must select a password. The password you select
prevents others from changing the rating limits you set.
To select your password and access the LOCKS menu:
1. Press MENU, then press
or to highlight the LOCKS menu.
2. Press ▲ or ▼ to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the LOCKS menu for the first time, select a
four-digit number to be your password. Press ENTER.
4. Enter the password again to confirm it, and then press ENTER.
The LOCKS menu appears.
LOCKS
NEW PASSWORD
SELECT:[0-9] SET :ENTER
END:EXIT
Menu/
Enter
Exit
FAVORITE CH :CH 002
SET / CLEAR
SETUP CH 002 0 0 0
0 0 0 0
TV CABLE 0 0 0 0
:ADJUST CLEAR:ENTER
END:EXIT
LOCKS
NEW PASSWORD
----
SELECT:[0-9] SET :ENTER
END:EXIT
LOCKS
CONFIRM PASSWORD
SELECT:[0-9] SET :ENTER
END:EXIT
Using the TV’s
Features
Note:
The password you programmed is also used
in the LOCKS menu; see pages 26-28.
Channel
Numbers
Channel 34
J3S40121B(E)_P24-30 24/02/2005, 6:06 PM24
To Next Page
Need help?
General
