Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
15
LINE IN
LR
TV
Amplifier
Connecting an audio system
This connection allows you to use an audio amplifier and external
speakers, and adjust the audio level using the TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the TV’s built-in speakers (see “Turning off the built-in
speakers” on page 57).
You will need:
• one pair of standard audio cables
Note:
To hear sound when using an external audio amplifier,
the volume of both the TV and the amplifier must be set
above 0 (zero).
For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.
To Next Page
Loading...
Need help?
General
