English - 13 -
English
Connecting a home network
Connectivity feature allows the TV to connect to the
home network wired or wirelessly. You can use this
networking system to connect to the Toshiba Portal or
to access photo, video and audio les that are stored
on a media server connected to the network and play/
display them on the TV.
Wired connection
Connect the TV to the modem/router via a LAN
cable (not supplied). Select Network Type as Wired
Device in Network Settings menu and then highlight
Network. Press Left or Right buttons and set as
Enabled to connect.
Broadband
ISP connection
LAN input
on the TV
LAN Cable
modem/router
LAN Cable
access point
Wireless connection
To connect the TV to the home network wirelessly just
select Network Type as Wireless Device in Network
Settings menu and then highlight Network. Press
Left or Right buttons and set as Enabled to connect.
The TV will search for available networks. Select the
desired network and press OK. The TV has a built-in
WLAN system and has no need for additional devices
to connect to a wireless network.
Broadband
ISP connection
TV (Built-In WLAN system)
LAN Cable
wireless modem/router
access point
Performance depends on many factors, conditions
and variables, including distance from acces
point(AP), volume of network trafc, building materials
and construction, operating system used, mix of
wireless products used, interference and other
adverse conditions.
Please refer to Network Settings section to congure
a wired or a wireless connection, if more detailed
information is needed.
To Next Page
Loading...
Need help?
General
