Loading the Media
1. Press the Top Cover Open Button to open the Top
Cover.
［B-EP2DL Series］
［B-EP4DL Series］
2. Move the Paper Guide Lever toward the Operation
Panel and the Paper Guides outward.
3. Place a media roll in the printer.
4. Adjust the Paper Guides to the media roll width.
5. Push back the Paper Guide Lever to lock the Paper
Guides.
6. Pull the top edge of the media toward the Operation
Panel, and close the Top Cover removing slack of
the media.
Notice
• Please use TOSHIBA TEC approved media only.
We are not responsible for any print result caused
by use of other media
• When you order media, please contact the nearest
TOSHIBA TEC representative.
Top Cover
Open Button
Top Cover
Top Cover
Open Button
Top Cover
Paper Guide
Lever
Pape
To Next Page
Loading...
Need help?
General