Toshiba e-STUDIO 3015AC User Manual

3.User Functions
18 Admin
 Allowing the acquisition of the investigation logs
You can set whether to allow the service technician to get the investigation logs.
 USB Cable Print
A setting to enable or disable USB Cable Print has been added.
This settings are linked to the settings on the [Administrator] Tab > [Setup] > [Print Service settings] > [USB Cable
Print] screen of TopAccess.
 P.42 “Setting up USB Cable Print”
Item name Description
Prohibit Select this to prohibit the service technician from getting the investigation logs.
Allow Select this to allow the service technician to get the investigation logs.
Item name Description
USB Printing
Set whether to enable or disable USB cable printing.
USB Cable Print
Mode
Select the mode used for printing via a USB connection.
 IPP Over USB— Normally use this mode.
Select this item to print using the AirPrint function.
 Legacy USB (Win)— Use this mode when you are already using our MFPs and give priority
to the compatibility with them.

Toshiba e-STUDIO 3015AC Specifications

General

Copy Resolution	600 x 600 dpi
Max Paper Capacity	3, 200 sheets
Warm-Up Time	Approx. 20 seconds
Scan Resolution	600 x 600 dpi
Fax Compatibility	Super G3 (optional)
Duplex Printing	Standard
Print Speed	30 ppm
Resolution	600 x 600 dpi
Memory	4 GB
Hard Disk Drive	320 GB
Dimensions	585 x 640 x 787 mm
Type	Colour Multifunction Printer
Functions	Copy, Print, Scan
Paper Size	A5R-A3
Original Size	A3
First Copy Out Time	Color: 7.8 seconds, Black & White: 5.9 seconds
Fax Transmission Speed	Approx. 3 seconds per page
Control Panel	9" Colour Touchscreen
Scanner Type	Color Scanner
Network Connectivity	Ethernet