User’s Manual 6-7
Power and Power-Up Modes
Monitoring battery capacity
Remaining battery power can be monitored using the following methods.
■ Clicking the battery icon on the Taskbar
■ Via the Battery Status in the Windows Mobility Center window
Technology which increases battery operating time
This computer is equipped with technology which increases battery
operating time.
The following functions allow for increased battery operating time.
1. Semi-transparent LCD (PORTÉGÉ R600 only)
2. ODD
3. LAN
■ You should wait at least 16 seconds after turning on the computer
before trying to monitor the remaining operating time. This is because
the computer needs this time to check the battery's remaining capacity
and then calculate the remaining operating time, based on this together
with the current power consumption.
■ Please be aware that the actual remaining operating time may differ
slightly from the calculated time.
■ With repeated discharges and recharges, the battery's capacity will
gradually decrease. In view of this it will be noted that an often used,
older battery will not operate for as long as a new battery even when
both are fully charged.
■ BackLight On/Off button
Please refer to the Special features section in Chapter 3, Hardware,
Utilities and Options.
■ To start BIOS Setup;
1. Turn on the computer while pressing the ESC key.
2. Press the F1 key when directed.
■ To end the BIOS Setup;
1. Press End and then press the Y key to accept the changes.
The computer will restart.
■ Optical disc drive power on/off function
Please refer to the Hot keys section in Chapter 5, The Keyboard.
■ Built-in LAN Enable/Disable function
Please refer to Chapter 7, HW Setup, for details.
To Next Page
Loading...
Need help?
General