4-30 User’s Manual
Qosmio F60 Series
Connecting the Cable
This section describes how to connect the coaxial cable to your computer.
Connecting the coaxial cable
1. Save data, shutdown Windows and turn off the power.
2. Connect the coaxial cable to the TV antenna port of your computer.
Figure 4-7 Connecting the coaxial cable
When lightning occurs, do not touch the antenna line. This may cause an
electric shock.
If you have to operate your computer during a thunderstorm and are
connecting the TV tuner to an outside antenna, you should operate your
computer using AC power mode. The AC adaptor offers some protection
against (but does not entirely prevent) possible electric shock caused by
lightning. For complete protection, do not operate your computer during a
thunderstorm.
1. TV antenna port 2. Coaxial cable
1
2
When you have been using a descrambler to receive the programs on
cable TV or satellite broadcasting, connect the set-top box and splitter to
the coaxial cable.
To Next Page
Loading...
Need help?
General