User’s Manual 4-35
Operating Basics
Installing/Removing batteries
Be sure to install the dry batteries provided with this product before using
the Remote Controller.
The procedures for installing and removing the batteries vary depending on
the type of the Remote Controller. Check the type and then install or
remove the batteries as instructed.
Even if within the effective scope as described above, the remote control
may malfunction or not work correctly in the following cases.
■ When an obstacle stands between the infrared receiver window of your
computer and the Remote Controller.
■ When direct sunlight or strong fluorescent light strikes the infrared
receiver window.
■ When the infrared receiver window or the infrared emission part of the
Remote Controller is dirty.
■ When other computers which use an infrared remote controller are
used near to your computer.
■ When a low battery condition is present.
Store the battery for the remote control beyond the reach of children.
If a child swallows a battery, this might result in choking. If it happens,
contact a doctor immediately.
To Next Page
Loading...
Need help?
General