9
CV510U (E/F) Web 213:276
Chapter 1: Introduction
Features of your new TV
The following are just a few of the many exciting features of
your new Toshiba widescreen, integrated HD, LCD TV:
• Integrated digital tuning (8VSB ATSC and QAM)
eliminates the need for a separate digital converter set-top
box (in most cases).
• Three HDMI
™
digital, high-definition multimedia
interfaces with 1080p input support (- page 15).
• HDMI capabilities
Lip-Sync Latency feature activates an auto audio/video
display timing adjustment function that allows HDMI
source devices to accurately perform synchronization
automatically.
• REGZA-LINK allows control of external devices from the
TV remote via HDMI connection (- page 50).
• Two sets of ColorStream
®
HD high-resolution component
video inputs (- page 14).
• Digital Audio Out optical audio connection with Dolby
®
Digital optical output format (- page 45).
• CableClear
®
digital picture noise reduction
(- page 55).
• PC IN (Analog RGB) computer terminal (- page 18).
• Channel Labeling allows you to put the Call Letters (e.g.
ABC, HBO, etc.) on the screen along with the station
numbers, so you always know what you’re watching
(- page 30).
• ColorMaster
™
allows you to adjust the TV’s standard
colors. The menu for this feature has a unique “black”
design to enhance contrast while you’re adjusting the color
(- page 56).
Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using its many
exciting features.
1 Observe the following when choosing a location for the
TV:
• Read “Important notes about your LCD TV”
(- page 6).
• Place the TV in a proper location (- pages 2–5)
2 Do not plug in any power cords until AFTER you have
connected all cables and devices to your TV.
3 BEFORE connecting cables or devices to the TV, learn
the functions of the TV’s connections and controls
(
- pages 10–11).
4 Connect your other electronic device(s) to the TV
(
- pages 12–18).
5 See “Chapter 3: Using the remote control” (- page 19)
for an overview of the buttons on the remote control,
install the batteries and prepare to operate your other
device(s).
6 AFTER connecting all cables and devices, plug in the
power cords for your TV and other devices.
7 See “Menu layout and navigation” for a quick overview of
navigating the TV’s menu system (
- page 26).
8 Program channels into the TV’s channel memory
(
- page 29).
9 For details on using the TV’s features, see Chapters 6
and 7.
10 For help, refer to the Troubleshooting Guide, see
Chapter 8.
11 For technical specifications and warranty information, see
Chapter 9.
32_37CV510U_EN.book Page 9 Friday, February 22, 2008 5:40 PM
To Next Page
Loading...
Need help?
General