User’s Manual 2-25
The Grand Tour
Slim size remote controller
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
Removing the batteries
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Press gently until it clicks into place.
Placing the slim size remote controller
Inserting a slim size remote controller
To insert the slim size remote controller, follow the steps below.
1. Make sure the ExpressCard slot is empty.
2. Set the front side upward and insert the slim size remote controller.
Inserting the slim size remote controller
3. Press gently to ensure a firm connection.
Removing a slim size remote controller
To remove the slim size remote controller, follow the steps below.
1. Press on the slim size remote controller gently to release it.
2. Grasp the slim size remote controller and pull it out from the slot.
21
1. Stopper
2. Battery
1
1. Slim size remote controller
To Next Page
Loading...
Need help?
General
